.
R11 Series stainless steel regulator tekanan regulator tekanan baja adalah Single-stage diafragma, struktur vakum Output diafragma stainless.Wis struktur ngurangi tekanan piston, meksa stopkontak pancet, utamané digunakake kanggo meksa input dhuwur, cocok kanggo gas diresiki, gas standar, korosif etc.
Data teknis regulator tekanan
1 | Max tekanan inlet | 500, 3000 psi |
2 | Tekanan outlet | 0~25, 0~50, 0~100, 0~250, 0~500 psi |
3 | Tekanan bukti | 1,5 kaping tekanan dirating maksimum |
4 | Suhu kerja | -40°F-+165°F(-40°C-+74°C) |
5 | Tingkat kebocoran | 2*10-8 atm cc/detik |
6 | Cv | 0.08 |
Fitur Utama 6000PSIregulator tekanan
1 | Tunggal-tahap ngurangi Struktur |
2 | Gunakake hard-seal antarane awak lan diafragma |
3 | Body Thread: 1/4" NPT (F) |
4 | Gampang kanggo nyapu ing njero awak |
5 | Filter bolong ing njero |
6 | Panel dipasang utawa dipasang ing tembok |
Aplikasi khas Regulator Stainless Steel
1 | Laboratorium |
2 | Kromatografi Gas |
3 | Gas Laser Kab |
4 | Bis gas |
5 | Industri lenga lan kimia |
6 | Instrumen sing diuji |
Informasi Pesenan--300 bar regulator
R11 | L | B | B | D | G | 00 | 02 | P |
Item | Bahan Badan | Bolongan awak | Tekanan Inlet | Outlet Tekanan | Pengukur Tekanan | mlebu ukuran | Outlet ukuran | Tandhani |
R11 | L:316 | A | D: 3000 psi | F: 0-500 psig | G:Mpa gage | 00:1/4″NPT(F) | 00:1/4″NPT(F) | P: Pemasangan panel |
B : Kuningan | B | E: 2200 psi | G: 0-250 psig | P: Psig/Bar Gauge | 01:1/4″NPT(M) | 01:1/4″NPT(M) | R: Kanthi katup relief | |
D | F: 500 psi | K: 0-50 pig | W: Gak onok | 23:CGGA330 | 10:1/8″ OD | N: Jarum pedhet | ||
G | L: 0-25 psig | 24:CGGA350 | 11:1/4″ OD | D: katup diafragma | ||||
J | 27:CGGA580 | 12:3/8″ OD | ||||||
M | 28:CGGA660 | 15:6mm OD | ||||||
30:CGGA590 | 16:8mm OD | |||||||
52:G5/8″-RH(F) | ||||||||
63:W21.8-14H(F) | ||||||||
64:W21.8-14LH(F) |